| Attributes' Summary |
| Type |
a value from AnimationNodeType.
|
| Begin |
a sequnece of values that define the begining of this element
Begin is
|
| Duration |
defines the length of the simple duration.
Duration is
|
| End |
a sequnece of values that define the ending of this element
End is
|
| EndSync |
controls the implicit duration of time containers,
as a function of the children.
The endsync attribute is only valid for
par and excl time container elements, and media elements with timed
children (e.g. animate or area elements).
EndSync is
eiter a short constant from EndSync,
an interface reference to a child XTimeContainer
or void.
|
| RepeatCount |
the number of iterations of the simple duration.
RepeatCount is
|
| RepeatDuration |
the total duration for repeat.
RepeatDuration is
|
| Fill |
the attribute that specify the behaviour how an element
should be extended beyond the active duration by freezing the final
state of the element.
Fill is
a value from AnimationFill.
|
| FillDefault |
the default value for the fill behavior for this element and all
descendents.
FillDefault is
|
| Restart |
defines the restart behaviour of this element.
Restart is
a short value from AnimationRestart.
|
| RestartDefault |
defines the default restart behaviour for this element and all descendents.
|
| Acceleration |
defines the acceleration for this element.
Element time will accelerate from a rate of 0 at the beginning up
to a run rate, over the course of the specified proportion of the
simple duration.
Acceleration is
a value between 0 (no acceleration) and 1 (acceleration until end
of the elements duration).
|
| Decelerate |
defines the deceleration for this element.
Element time will deceleration from a run rate to a rate of 0 at the
ending, over the course of the specified proportion of the
simple duration.
Decelerate is
a value between 0 (no deceleration) and 1 (deceleration from beginning
of the elements duration).
|
| AutoReverse |
defines the auto reverse settings for this element.
AutoRevers is
|
| UserData |
|
| Attributes' Details |
| Type
|
Begin
any Begin;
- Description
- a sequnece of values that define the begining of this element
Begin is
double describes the element begin as an offset in seconds from an implicit syncbase.
The definition of the implicit syncbase depends upon the element's parent time container.
The offset is measured in parent simple time.- Event describes an event and an optional offset that determine the
element begin. The element begin is defined relative to the time that the event
is raised.
- Timing::INDEFINITE the begin of the element will be determined by an
external event to the element.
- ::sequence<any> a sequence of values described above if more than
one begin value is defined for this element.
- void if no begin behaviour is defined for this element.
- See also
- http://www.w3.org/TR/smil20/smil-timing.html#adef-begin
|
|
Duration
any Duration;
- Description
- defines the length of the simple duration.
Duration is
double specifies the length of the simple duration in seconds.- Timing::INDEFINITE specifies the simple duration as indefinite.
- Timing::MEDIA specifies the simple duration as the intrinsic media duration. This is only valid for elements that define media.
- void the simple duration for the element is defined to be the implicit duration of the element.
- See also
- http://www.w3.org/TR/smil20/smil-timing.html#adef-dur
|
|
End
any End;
- Description
- a sequnece of values that define the ending of this element
End is
double describes the element end as an offset in seconds from an implicit syncbase.
The definition of the implicit syncbase depends upon the element's parent time container.
The offset is measured in parent simple time.- Event describes an event and an optional offset that determine the
element end. The element end is defined relative to the time that the event
is raised.
- Timing::INDEFINITE the end of the element will be determined by an
external event to the element.
- ::sequence<any> a sequence of values described above if more than
one begin value is defined for this element.
- void if no end behaviour is defined for this element.
- See also
- http://www.w3.org/TR/smil20/smil-timing.html#adef-end
|
|
EndSync
any EndSync;
- Description
- controls the implicit duration of time containers,
as a function of the children.
The endsync attribute is only valid for
par and excl time container elements, and media elements with timed
children (e.g. animate or area elements).
EndSync is
eiter a short constant from EndSync,
an interface reference to a child XTimeContainer
or void.
- See also
- http://www.w3.org/TR/smil20/smil-timing.html#adef-endsync
|
|
RepeatCount
any RepeatCount;
- Description
- the number of iterations of the simple duration.
RepeatCount is
double
this is a numeric value that specifies the number of iterations.
It can include partial iterations expressed as fraction values.
A fractional value describes a portion of the simple duration.
Values must be greater than 0.- Timing::INDEFINITE the element is defined to repeat indefinitely
(subject to the constraints of the parent time container).
- void
no repeat count is defined for this element.
- See also
- http://www.w3.org/TR/smil20/smil-timing.html#adef-repeatCount
- See also
- ? (no identifier found)
EndSync
|
|
RepeatDuration
any RepeatDuration;
- Description
- the total duration for repeat.
RepeatDuration is
double
specifies the duration in element active time
to repeat the simple duration in seconds.- Timing::INDEFINITE the element is defined to repeat indefinitely
(subject to the constraints of the parent time container).
- void
No repeat duration is defined for this element.
- See also
- http://www.w3.org/TR/smil20/smil-timing.html#adef-repeatDur
|
|
| Fill
|
FillDefault
short FillDefault;
- Description
- the default value for the fill behavior for this element and all
descendents.
FillDefault is
- The values AnimationFill::REMOVE, AnimationFill::FREEZE,
AnimationFill::HOLD, AnimationFill::TRANSITION and AnimationFill::AUTO
specify that the element fill behavior is the respective value.
- The value AnimationFill::INHERIT specifies that the value of this attribute
(and of the fill behavior) are inherited from the FillDefault value of the parent
element. If there is no parent element, the value is AnimationFill::AUTO.
- See also
- http://www.w3.org/TR/smil20/smil-timing.html#adef-fillDefault
- See also
- ? (no identifier found)
Fill
|
|
| Restart
|
| RestartDefault
|
Acceleration
double Acceleration;
- Description
- defines the acceleration for this element.
Element time will accelerate from a rate of 0 at the beginning up
to a run rate, over the course of the specified proportion of the
simple duration.
Acceleration is
a value between 0 (no acceleration) and 1 (acceleration until end
of the elements duration).
- See also
- http://www.w3.org/TR/smil20/smil-timemanip.html#adef-accelerate
|
|
Decelerate
double Decelerate;
- Description
- defines the deceleration for this element.
Element time will deceleration from a run rate to a rate of 0 at the
ending, over the course of the specified proportion of the
simple duration.
Decelerate is
a value between 0 (no deceleration) and 1 (deceleration from beginning
of the elements duration).
- See also
- http://www.w3.org/TR/smil20/smil-timemanip.html#adef-decelerate
|
|
| AutoReverse
|
| UserData
|
Copyright © 2013, The Apache Software Foundation, Licensed under the Apache License, Version 2.0. Apache, the Apache feather logo, Apache OpenOffice and OpenOffice.org are trademarks of The Apache Software Foundation. Other names may be trademarks of their respective owners.
